Asset Management
Validation of an Inertial Profilometer for Measuring Pavement Roughness (Reference Device Method)
- Publication no: AGAM-T002-16
- Published: 13 May 2016
- Edition: 3.0
- PDF (free) Download
This test method defines the procedure for performing validation checks of the measurements of pavement roughness determined using an inertial profilometer, by comparing them to the measurements from a static or manual reference device.
This test method is one of two alternative validation methods required by Austroads Test Method AG:AM/T001. The other validation method is Austroads Test Method AG:AM/T003.
Edition 3.0 released May 2016
Edition 2.0 released March 2011
Edition 1.0 released March 2007
- 1. Scope
- 2. References
- 3. Definitions
- 4. Equipment
- 5. Procedure
- 5.1. Validation of Distance Measurement
- 5.2. Validation of Roughness Measurement
- 6. Calculations
- 7. Reporting
- 7.1. Validation of Distance Measurement
- 7.2. Validation of Roughness Measurement
- 8. Failed Validation
- Annex 1 Example of Validation Checks
Related publications
Latest Asset Management News