Asset Management
- Publication no: AGAM-T014-16
- Published: 13 May 2016
- Edition: 3.0
- PDF (free) Download
This test method defines the procedure for performing validation checks of the measurements of pavement surface macro-texture determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.
It is preferable that the surface texture measurements made by the laser profilometer are validated against an objective measuring device that is not influenced by human error. However, if access to such a device is not possible comparisons can be made against manual sand patch measurements.
This test method is one of two alternative validation methods required by Austroads Test Method AG:AM/T013. The other validation method is Austroads Test Method AG:AM/T015.
This test method can also be downloaded as a Word document.
Edition 3.0 released May 2016
Edition 2.0 released March 2011
Edition 1.0 released March 2007
- 1. Scope
- 2. References
- 3. Definitions
- 4. Equipment
- 5. Procedure
- 5.1. Validation of Distance Measurement
- 5.2. Validation of Surface Texture Measurement
- 5.2.1. Reference Device Method
- 5.2.2. Volumetric Method
- 6. Calculations
- 6.1. Reference Device Method
- 6.2. Volumetric Method
- 6.3. Effect of Speed
- 7. Reporting
- 7.1. Validation of Distance Measurement
- 7.2. Validation of Surface Texture Measurement
- 7.2.1. General Details
- 7.2.2. Reference Device Method
- 7.2.3. Volumetric Method
- 7.2.4. Effect of Speed
- 7.2.5. Validation Notes
- 8. Failed Validation