Pavement
- Publication no: AGPT-T530-19
- Published: 12 September 2019
- Edition: 7.0
- PDF (free) Download
This test method provides an overview of the Austroads sprayer calibration test methods AGPT/T531, AGPT/T532, AGPT/T533, AGPT/T534, AGPT/T535 and AGPT/T536.
The application of the binder at the correct design rates depends on the design, manufacture and maintenance of the bitumen sprayer, appropriate calibration methods, and the operating procedures and skills and competency of the operator.
The performance requirements discussed in this document apply to purpose-built mechanical bitumen sprayers for the application of hot and/or cold bituminous materials used in sprayed sealing.
These requirements do not apply to spraying equipment used exclusively for hand sprayed work or where the pressure source is compressed air and pressurised tank.
This test method can also be downloaded as a Word document.
Edition 7.0 published September 2019
- References to AP-T262 were updated in clauses 4, 5, 6.2 and 7.
Edition 6.0 published June 2018
Edition 5.0 published May 2015
Edition 4.0 published November 2012
Edition 3.0 published February 2012
Edition 2.0 published June 2006
Edition 1.0 published June 2005
- 1. Preface
- 2. Foreword
- 3. Scope
- 4. General
- 5. References
- 6. Sprayer Calibration Requirements
- 6.1 General
- 6.2 Sprayer Calibration Certificates
- 7. Safety Disclaimer, and Legal and Environmental Requirements
- 8. Testing of Various Types of Bitumen Sprayers
- 9. Equipment Required for Testing
- 9.1 Collection Device
- 9.1.1 Fixed Test Trough
- 9.1.2 Test Mat
- 9.1.3 Portable Trough
- 9.2 Bitumen Sprayer
- 9.2.1 Bitumen Pump
- 9.2.2 Spray Bar
- 9.3 Timing Device
- 9.1 Collection Device
- 10. Reporting
- 10.1 Sprayer Calibration Certificate