Publications

This report provides recommendations to improve the current guidance on cycling and micromobility planning in Austroads Guide to Traffic Management (AGTM).

This report describes the progress of the Assessing Fitness to Drive Implementation project during its first full year of operation. It describes the structures, systems, and resources established to support project operations, and the main…

The purpose of this report is to investigate specialty harnesses and vests used by children and young people with disabilities and medical conditions in motor vehicles, with the aim of informing the development of guidance and standards for their…

This test method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm and is the preferred method for…

Australia’s freight industry is at a turning point. The transition to low and zero-emission heavy vehicles (ZEHVs) is critical to achieving net zero targets, but it presents significant challenges for road infrastructure. As these vehicles are often…

This test method applies to polymer modified binders, polymers and crumb rubber.Materials are sampled according to this protocol to ensure that correct sampling procedures are followed and that test results provide the required information on…

Austroads Technical Specification ATS 3520 sets out the requirements for the construction of lean-mix concrete subbase (LCS).

Austroads Technical Specification ATS 3530 sets out the requirements for the supply of concrete and construction of the base (upper) layer of PCP, CRCP, JRCP and SFCP formats.

Guide to Temporary Traffic Management Part 8: Temporary Traffic Management Categories and the National Training Framework provides clarification of the roles and responsibilities for any party involved in temporary traffic management including: road…

Austroads Technical Specification ATS 3550 sets out the requirements for the diamond grinding of concrete pavements. It may be used for the rectification of a newly constructed non-conforming pavement or for the rehabilitation of an existing…