Publications

2017 Revision of Australian Standard AS 5100 Part 1: Scope and General
AS 5100 is the only Australian standard specific to bridges. For the first time, the scope has been extended from primarily a structural design standard to include other bridge related topics including safety-in-design, climate change and…
2017 Revision of Australian Standard AS 5100 Part 2: Design Loads
Part 2 Design loads of Australian Standard AS 5100 Bridge design sets out the parameters for loads on all bridges in Australia. There have been numerous enhancements to improve the scope, clarity and intent. Design loads for road traffic barriers…
3D BIM Modelling Challenges for the Bridge over Uarbry Causeway
Roads and Maritime Services (Roads and Maritime) has engaged Opus International Consultants (Opus) to undertake the detailed design and preparation of tender documentation for the bridge over Uarbry Causeway on the Golden Highway (HW27), 64.4km west…
A Comparison of the Effect of Pier Shape on Flood Loading on Bridges
The resistance to flood and debris loading are critical parameters affecting design of bridges under flood loading. For instance, bridges which are under extreme flood could partially or completely immerse in the water, resulting in very notable…
A Drift and Displacement Based Seismic Assessment Method for Bridge Abutments
The present study is concerned with the drift and displacement based seismic assessment of bridge abutments. This study is distinguished from previous research that has been reported in the literature in that what is of primary interests is the…
A New Damage Indicator for Drive-by Monitoring using Instantaneous Curvature
Drive-by monitoring has enhanced the possibilities for bridge damage detection, with the potential to deliver a bridge rating in the time it takes an instrumented vehicle to pass overhead. This paper outlines the importance of Instantaneous…
A Rail Bridge in Twenty Days: The Torrens To Torrens North:South Corridor Upgrade
The Torrens Road to Torrens River (T2T) project forms part of the overall North-South Road Corridor upgrade in Adelaide, South Australia and incorporates many components such as a new lowered motorway, road, service and pedestrian bridges, retaining…
A Simple Method of Launch Geometry Design of Prestressed Concrete Bridge in Three Dimensional Space
Incrementally launched prestressed concrete bridges are built in segments in the casting bed. Finished segments are pushed out of the casting bed to leave space for construction of subsequent segments. The resulting geometry of the bridge will be…
A Vehicle Assessment Tool for Access Decision Support
Bridges on the Australian highway network are ageing, just as economic demands require increasing freight volumes. New trucks are continually being developed, and this has accelerated under the new National Heavy Vehicle Regulator’s Performance-…
ABC2017-003-17
  • ABC2017-003-17
  • 20 Apr 2017
  • Bridges
Munna Point Bridge was built in Noosa Heads, Queensland in the late 1970s. Over 1.8 million trips in each direction are made across the 106 metre bridge every year, by tourists and locals. The bridge is one of only two routes to reach the primary…