Skip navigation

Drivers & Vehicles
Drivers & Vehicles
This section includes managing drivers with health risks, requirements for visiting drivers, NEVDIS, and the introduction of connected and automated vehicles to Australasia.
Environment & Sustainability
Environment & Sustainability
This section covers Austroads' work on Sustainability, and the work of the Environment and Sustainability Task Force.
- Environment & Sustainability Task Force and Projects
- Austroads' Work on Sustainability
Road Safety & Design
Road Safety & Design
This section covers safety barrier assessments, and the work of the Road Safety Task Force and Road Design Task Force.
Transport Operations
Transport Operations
In this section you'll find information about our work to improve the efficient, reliable and safe operation of the road network for all road users.
Transport Infrastructure
Transport Infrastructure
This section includes information about strategic asset management, the management of bridges, pavements and tunnels, project delivery and the national prequalification system.

Pavement

Table of Contents

6.6 Fibre Reinforced Seals (FRS)

The design binder application rate is determined using the procedures for conventional sprayed seals (Section 5).

Typical rates of application for the glass fibre, and binder allowance for coating of the glass fibres are shown in Table 6.7.

Table 6.7: Typical binder allowances for glass fibre

Seal type	Glass fibre (g/m²)	Binder allowance
SAM	60	0.1 L/m² per 30 g/m² of fibre
SAMI	90	0.1 L/m² per 30 g/m² of fibre

Feedback form

What type of feedback would you like to leave?

Would you like a response?

Yes

No